Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 25, 2021 17:37:11 GMT
REGA or OEM '202'/'251' as long as the anti-Skate control is black & not coloured ie: Green/Red etc . Must be totally original, no mods at all & in Mint condition. Willing to pay £130.00 max.
|
|
|
|
Post by classicrock on Sept 26, 2021 10:02:56 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 26, 2021 11:16:49 GMT
Tis fixed Bias. utter nightmare, The magnet barrel can be extracted /set a bit further out to suite lower tracking force cartridges but an hassle i could do without. I doubt those REGA 'Carbon AT cartridges are as good as a 'VM95' & the high tracking force of the 'CARBON' gives me the creeps. I contacted him the other day & he says he's had a 'VM95ML' on it with no problems.  |
|
|
|
Post by Westie on Sept 26, 2021 14:51:31 GMT
Tis fixed Bias. utter nightmare, The magnet barrel can be extracted /set a bit further out to suite lower tracking force cartridges but an hassle i could do without. I doubt those REGA 'Carbon AT cartridges are as good as a 'VM95' & the high tracking force of the 'CARBON' gives me the creeps. I contacted him the other day & he says he's had a 'VM95ML' on it with no problems. Totally up,to you but I think side bias matters. I set it by eye, as origin Live recommend. It might be ok with a VM95 but I think you might sit there doubting and wondering. If you’re after peace of mind, adjustable bias might be worth holding out for. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 26, 2021 15:17:01 GMT
Sure will it will drive me up the wall with worry just like the stupid geometry of this arm im using now. Top & bottom the non adjustable bias will be why he'll be flogging it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 26, 2021 15:22:05 GMT
I made a rod for my own back when i decided to make it look pretty adding that top brace to the deck, IMHO it a load of bull shit that i would not hear any difference fitted or not, but i like the look of it now ive done it in black. I could fit a standard 'RB250' to it but id have the three mounting holes around the collar staring me in the face, again will drive me nuts  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2021 21:15:25 GMT
Well spent all day on & off the internet. Nothing.
|
|
